Tools required:

​

MVPs made in 2018 / 2019: Philips screwdriver (power tool not required, and it may even damage the drive). If your MVPs have Philips screws, let us know and we will send you a set of hex screws, which are less prone to damage to the drive.

​

MVPs made since 2019: 4mm Allen key (power tool not required, and it may even damage the drive)

​

Step by step guide:

​

1. Locate the screw embedded in the black felt disks at the front of the panels (may require some probing)

2. Unscrew screws on both panels

3. Twist the front of the panels away (and 'park' behind the tree points

4. Fold back the blue leather flap in the gullet

5. Unscrew the two screws securing the gullet plate

6. Remove the gullet plate

7. Insert the required gullet plate

8. Secure the gullet plate with the two screws previously removed

9. Fold blue leather flap back into position

10. Place the panels back into original position. Please make sure that the tree points are inserted into the pockets on the back of the panels

11. Secure the panels with the screws (and felt disks)

​

All screws should be tightened firmly.

​

​

​